RGB LED Digital Ribbon Kit , Ribbon, DMX Decoder, 36W PS
SKU: RL-SC-DRGB-KIT-3
This digital RGB LED flexible ribbon kit with DMX to digital signal decoder is a one of a kind product. This DMX to digital decoder works by interpreting DMX512 signal and outputting each DMX RGB address to its own section of LEDs on our UL Recognized digital ribbon controlled by an SPD2801 type IC chip. Each 5m roll of flexible digital RGB LED ribbon has 50 SPD2801 type IC chips allowing for roughly 17 meters of ribbon or 170 IC chips to be controlled by one DMX to digital decoder. See more
Each decoder is sold as a kit including one DMX to digital decoder /driver, two (one male, one female) XLR3 plug ends for making your own DMX cable, one 5m roll of digital RGB LED ribbon, 12mm wide (no quick connectors for this product) and one 36W / 12VDC wall plug style constant voltage power supply with one 5.5 x 2.1mm male jack to bare lead wire connector. Additional 5m rolls of ribbon may be purchased separately (additional 36W / 12VDC constant voltage power supply included). This product is perfect for the most demanding of lighting designers; allowing for a single strip of digital ribbon to be performing several different functions among several different sections on the same strip of ribbon simultaneously! A DMX controller (sold separately) is required to send a DMX signal to the included decoder / driver.
Hide
|
| Model |
Digital RGB LED Ribbon Strip with DMX to Digital Decoder Kit |
| SKU |
RL-HK-DRGB-KIT-3
|
| Dimensions |
Ribbon: 197"L x 0.50"W x 0.16"H; Controller: 4.9"L x 2.0"W x 1.6"H
Power Supply: 4.5"L x 2.0"W x 1.25"H |
| Constant Voltage Control Type |
SPD2801 Protocol |
| Constant Voltage DC Power |
12VDC |
| Watts |
Ribbon - 31W Controller - 2.2W Power Supply - 36W |
| Rating |
Ribbon, Controller, Power Supply: IP60 |
| Warranty Period |
1 Year |
